Neato D7 Connected Robotic Vacuum Disassembling Guide

Introduction

Neato D7 Connected Robotic Vacuum is an advanced and intelligent vacuum cleaner that can clean your house effortlessly. Its smart mapping and laser navigation system help it to navigate through your house while avoiding obstacles. However, like any other device, it may need maintenance, repair, or upgrades.

Tools Required for Disassembling

To disassemble the Neato D7 Connected Robotic Vacuum, you would need some tools such as:

• Screwdriver (Phillips & Flathead)
• Prying Tool
• Tweezers
• Scissors
• Clean Cloth
• Isopropyl Alcohol (to clean the components)

Disassembling Process

Step 1: Removing the Brush

The first step in disassembling the Neato D7 Connected Robotic Vacuum is removing the brush. To do that:

1. Turn off the vacuum cleaner and unplug it from the power source.
2. Flip the robot over, and locate the brush compartment.
3. Remove the brush guard by unscrewing the three screws that hold it in place. These screws are located on the bottom of the vacuum cleaner.
4. Use a prying tool to remove the brush. It may be helpful to use tweezers to remove the dust and debris that have accumulated around the brush.

Step 2: Removing the Side Brush and Side Cover

The next step is to remove the side brush and the side cover. Follow these steps:

1. Turn the robot over and locate the side brush and the side cover.
2. Remove the side brush by sliding it out of the holder.
3. Use a prying tool to remove the side cover. Be careful not to damage the clips that hold the side cover in place.

Step 3: Removing the Battery

To remove the battery of the Neato D7 Connected Robotic Vacuum, follow these steps:

1. Turn off the vacuum cleaner and unplug it from the power source.
2. Locate the battery compartment on the back of the vacuum cleaner.
3. Using a screwdriver, remove the two screws that hold the battery cover in place.
4. Remove the cover and disconnect the battery from the circuit board.
5. Using a prying tool, remove the battery from the battery compartment.

Conclusion

The Neato D7 Connected Robotic Vacuum is a fantastic device, but it may need maintenance, repair, or upgrades from time to time. With our disassembling guide, you can easily disassemble the vacuum cleaner and perform the necessary actions to keep your device running smoothly. We recommend following these steps to prevent damage to the device, injury, or electrical shock.